Details
Your washing machine consists of many important parts that must always be cleaned. Cleaning the machine is carried out 1 time in 3 months, but if you wash very often, and even quite dirty things, then the frequency of cleaning should increase.
We clean a drum and TEN
The deposition of minerals on the heater and the drum is a scum. It is she who often causes the washing machine to become unusable, if the problem is not solved for a long time. But now that you know what your scum threatens, you will clean the machine on time. And to clean the machine easily and simply, you will need ordinary vinegar, soda or citric acid.
Vinegar + baking soda
Structure:
- 2 cups of vinegar 9%;
- ¼ cup baking soda;
- ¼ cup of water;
- Sponge.
Cleaning process:
Dissolve soda in water and pour it into the tray for receiving washing powder. Pour vinegar into the drum itself and close the machine. Turn it on for the longest mode, as well as at maximum temperature.
Lemon acid
You will need about 5 packs of citric acid per 20 grams. Pour the contents of the bags into the powder tray and set the program to the maximum time and maximum temperature.
Seal Cleaning
A lot of dirt is always clogged under the seal. Including coins that you forgot to pull out of your jeans pockets. First you need to remove the coins and large debris, and then pay attention to whether there is mold in the gum cuff.
If there is mold, then it is better to take the tool Comet or Utyunok. With which you can easily remove dirt, mold and plaque. Thanks to the disinfectant, you quickly get rid of the unpleasant odor of mold. At the end of cleaning, wipe the entire gum with a dry towel.
Tray
In each washing machine, the powder tray is pulled out in its own way. Therefore, you need to look in the instructions how to do it correctly so that you do not accidentally break the device.
When the tray is removed, then inside you will see mold, a coating of powder and rinse aid. Take any dishwashing detergent and drip a little on the sponge. Wipe off any dirt, and then rinse the tray itself under the tap. You can use soda, laundry soap or detergent.
Filter cleaning
Drain pump
The drain pump is located at the bottom of the washing machine housing. Sometimes you close the pump with a panel, but you can easily find it if you look at the instructions for your typewriter.
Lay more rags on the floor so that when the water spills out, it does not flood the neighbors below. The lid is unscrewed counterclockwise, and in the resulting recess you can see dirt, plaque, mold and sand.
Wipe everything thoroughly with a sponge, cloth and a toothbrush for convenience, and then put the cover back in place.
Water inlet filter
Such cleaning should be carried out no more than once every six months. Because it is clogged less often than everything else.
You need to block the cold water, and then find the inlet hose on the back of the machine.Unscrew the hose from the machine, and in the opening you will see a filter in the form of a mesh.
It can be reached with ordinary pliers.
Rinse and clean the filter thoroughly and reinsert it. Screw the inlet hose back and voila! Your machine is clean and ready to go!
