Appearance plays an important role in creating a stylish image. Properly selected and correctly complemented your wardrobe effectively accessories for hair.
Often we are faced with the problem of choosing jewelry. The assortment is amazing with its many choices. But sometimes, even in such a variety, we cannot find a thing that suits us.
In this case, we will always be able to realize our ideas in a jewelry made by our own hands.
We offer you several options for DIY hair jewelry.
Which are perfect for a holiday exit, as well as for everyday wear.
And what you like, of course, only you will decide.
Bead Jewelry
These jewelry look feminine and sophisticated.
Using beads, you are adjacent to create modest or bright and voluminous accessories. It all depends on the size of the material, color and technique.
Original jewelry with glue
One easy way to create a bead jewelry. For example, with glue, attach them to the rim, comb, hairpin.
But be careful when working with glue. Apply the right amount so that the excess does not stain the beads.
Thus, you will get an interesting accessory.
Fine ideas using wire
You can also use wire to create jewelry.
And putting on her beads to create the design you like of a particular model. But for such decoration you need a hairpin for attaching to the hair.
To do this, you will need a wire of 0.33 mm (thickness) about 50 cm long, beads, as well as scissors or pliers, and a hairpin.
Thus, we put on the beads, hold it so that it does not move, scroll the wire several times to fix the beads. Then the desired distance recedes (approximately 0.5 cm). And dressing and securing subsequent beads in the same way, we ourselves model the jewelry and give the desired shape. The material can be large and smaller beads, or pearls, as well as beads.
We can also add other small accessories to decorate such a product.
As an option for attaching to the hair, there may be a hairpin or comb. You can easily attach the finished twig to the rim with wire, or glue it.
Interesting ribbon decorations
A bead decoration with a silk ribbon also looks very cute.
To do this, take: Beads and tape of a similar shade, as well as fishing line and scissors. We can use the fishing line for weaving, and we can also use the method of weaving with wire.
To weave on a fishing line, take beads or beads, put 6 beads on a fishing line and pass one edge through the first bead so that you fix it and make the first petal of your flower.
Then dial 6 beads again and thread through the first one that was scored this time so you will get 2 petals, continuing to make several flowers according to the same pattern.
When your flowers are ready, you will take a ribbon and gently attach it to the last flower, using a thread and a needle. Also attach the tape along the other edge of our flowers. A gentle and feminine accessory is ready.
Beads on a chain
Mysteriously and extraordinary, the beads on chains look like they are worn as a hair ornament.
To do this, beads are attached to the chain with the help of its links, thereby spicing up such an accessory.
Satin Ribbon Hair Ornament
This type of accessory is very popular because it allows you to create bright, and diverse models. It is also easy to manufacture, which makes it possible to experiment with the design of your jewelry.
For a successful result you will need: fabric for flowers, felt or cardboard (for the base of fastening), scissors, glue gun, tweezers, a needle and threads of different colors, a ruler, as well as a fabric burner and a lighter (for even and neatly crafted petals).
Kanzashi
Kanzashi is a fabric-based jewelry making technique. The composition is composed of separately folded and sealed or glued petals.
No matter how serious the name of this technique may seem, with the right approach, this is a rather interesting, easy, and also fascinating occupation. Tools for work will need the same as described above. Making petals begins with the fact that you should prepare pieces of tape.
Then we gently burn the edges of our segment with a lighter, while holding the cloth with tweezers so as not to burn our hands.
When the edges of the fabric are processed, we fold our petals, giving them the desired shape, and solder the edges over the fire.
Now we can begin to create a design. We can fix the petals with glue on felt circles or cardboard wrapped with tape, as a base for attaching to elastic or hair clips.
For fastening to the rim or ridges, it is possible to create vertical structures, in which case the petals are glued and attached to the glue, and also sewn at the base.
There are many methods of kanzashi execution, here are some schemes with a detailed description of step-by-step work.
Flowers
Flowers are a universal model of decoration of ornaments, and from the ribbons they are bright and voluminous. That is why they look spectacular and charming.
To create beautiful flowers, we will take ribbons.
Having decided on the size of the flower, we begin to draw the petals on paper. Then we cut out and applying the form to the ribbon, cut out or burn the petals.
When the part is ready to create volumes, we sew two petals along the upper edge and turn the seam inward. Then at the bottom base we make a few stitches and slightly tighten the base of the petal.
Then we take the base in this case, it is felt circles, and folding the petals we fix them with glue to each other.
If we make a multilayer flower from a whole round flower, then it is possible to sew folded layers together.
Also, one of the ways to create a rose can be folding the ribbon, stitching one edge in a circle.
You can adjust the volume and height of the flower by taking a narrow or wide ribbon. Such flowers will perfectly decorate any rim or elastic band, and also look interesting and gently as decoration on a bunch. They are attached to the felt circle with glue, and then to the hairpin or elastic, as well as the rim.
Bows
Bows are decorated with hair clips and elastic bands. This is one of the most beloved jewelry of girls. And having made such a decoration yourself, you will receive a lot of thanks, especially since bows are very easy to make at home.
To make a classic bow, we need 2 pieces of tape of 5 cm. and one narrow 0.5cm. threads, glue gun, and also a hair clip where actually our bow will be attached.
We fold the ribbon on the floors and sew the edges, after which we tighten the bow in the middle with a thread so that it looks like a butterfly.
We perform the same procedure with the second tape. Then we connect the bows with a narrow flying in the middle and putting glue on a narrow ribbon on one side, we fasten it to a hairpin. Such a bow can be decorated by attaching in the middle of a bead or flower.
Do not forget to trim the edge over the fire so that it does not crumble.
We also offer you several more options for bows, which you could make yourself.
Jewelry from Fomiran
Fomiran is a soft plastic material on a foam basis, most often sold in sheet form.
Perfect for making jewelry, and other jewelry.
Fomiran products look delicate and elegant due to their weightless structure. And bright shades make it possible to create a mass of bewitching models of hairpins and other jewelry.
Its advantages are that it is malleable in work and easily changes shape when heated and does not lose it when it cools.
For work, take: sheets of fomyran, a drawing of the parts to be made, scissors, a glue gun, an iron (to create the shape of the petals), as well as a hole punch (for smaller parts).
When everything is ready, we can begin to create our flowers. Cut from the cardboard blanks of our petals, apply to fomiran and cut them out. Then we apply the already cut petal to the heated surface.
When we see that the material has become plastic, we twist our petal into a tube and straighten it. Thanks to these actions, the petals will be curved and more realistic. Then we fix our petals each subsequent on top of the previous one, with glue.
And now our rose is ready. It is also possible to cut out several solid petals from such figures, and add a multilayer flower.
Such flowers will be an amazing decoration for a hairpin or comb, as well as a hoop.
