Crochet shawl: knitting patterns, description, as well as patterns for patterns

Simple in complexity openwork shawl with a knitting pattern

Not a complicated version of an openwork shawl that even an experienced girl can knit. It is only necessary to understand the basics of the simplest loops, and then we all go like clockwork. In order to knit a simple openwork shawl, you need 500 grams of yarn, it is desirable that it was 50% wool and 50% acrylic and hook number 3.

1. Such a shawl model will need to be taken from the bottom up.
2. Start with a set of air loops of 5 pieces and continue the process as indicated in the diagram.
3. Thus, you will tie the entire border, and then proceed to set the middle - sirloin net.
4. When you get to the set of loops 30 pieces, then immediately go to the “pineapple” pattern and knit further according to the example of the scheme.
5. When the product is ready, loops of crochet are looped along its edges, which forms the appearance of the finished pattern.
6. If you wish to decorate shawls, you can add a fringe around the perimeter.

Medium in complexity openwork shawl with knitting pattern

To knit a delicate, openwork work of art, you need a considerable amount of time, three skeins of snow-white yarn, as well as hooks under No. 3 or No. 5. In this shawl, such patterns will be used as: a chain of air loops, connecting posts, single crochet and crochet posts. Follow our scheme clearly and you will succeed.

1. First you need to make separate elements that will decorate our future shawl. Knit a few dozen small decorative flowers, you can even not white, but another to your taste, color.
2. To properly start knitting a shawl, you should start with a pattern of chains of air loops, and in the center make the same chain 1A. On the left side, dial chains 1B and 2B, and on the opposite side of the center, two identical chains B, but dialed in mirror image.
3. Each typed tape should have 16 loops. Initially, make a tape 1A, then 2A, as indicated in the diagram, connecting 2A with the above arches using a connecting column.
4. The arches themselves are decorated with our flowers, knitted earlier.
5. Next, we make a new openwork tape for 1B, we stick it to the outside. After that, work is underway on tape 2B and we will fasten it in the same way as 1B.
6. After we follow the intended pattern, knitting 2 more ribbons, exactly the same as 1B and 2B, but located on the right side of the center with flowers.
7. We knit this shawl with this method to the end and at the bottom we connect the two short parts with a chain from a set of five air loops.
8. After we collect another row of arches, then one single crochet, 7 air stitches, 1 single crochet in each 2 stitches. We continue this process to the very end. We finish the work with one row of a single crochet.

Heavy-duty shawl with fan patterns with a knitting pattern and detailed description

A shawl that is more complicated in work, which turns out to be a very beautiful creation. You will need 5 skeins of yarn, any color that you like, hook number 3 for work. The shawl in finished form will have 168 cm in the widest part.

Air loop - vp

Double crochet - s.n.

Single crochet - p.

The work process will be described in detail in series:

1. First you need to dial: vp (5 pieces) connect 1 and the last loop using the loop s. Now we have a ring in which you need to knit a series of vp (3 pieces), after sn. (1 piece), after sn. (2 pieces), after vp (2 pieces), after sn. (3 pieces), after vp (2 pieces) and s.n. (3 pieces)

2. You should expand all the work and start knitting vp (3 pieces - a string), an arch from v. p. (2 pieces) and s.n. (3 pieces), then vp (2 pieces), after sn. (3 pieces), after vp (3 pieces), in the arch of vp (2 pieces), then S.N. (3 pieces), after vp (2 pieces) and s.n. (3 pieces)
3. Again, deploy the work and knit VP (3 pieces - string), into the arch from vp (2 pieces) do s.n. (3 pieces) followed by vp (2 pieces), after sn. (3 pieces), after vp (4 pieces), then into the arch from vp (3 pieces) do with. (1 pieces), after vp (4 pieces), then into the arch from vp (2 pieces) do s.n. (3 pieces), after vp (2 pieces), after sn. (3 pieces)
4. Once again, we expand our work and make VP (3 pieces - a string), into the arch of VP (2 pieces) do s.n. (3 pieces), then vp (2 pieces), after sn. (3 pieces), after vp (3 pieces), then into the arch from vp (4 pieces), knit with. (1 pieces), after vp (5 pieces), then skip the arch from vp (4 pieces), and to the next arch from vp (4 pieces) do s., After vp (3 pieces), then into the arch from vp (2 pieces), do s.n. (3 pieces), then vp (3 pieces), after sn. (3 pieces)
5. We are once again deploying our work and doing VP (3 pieces - a string), in an arch from vp (2 pieces) do s.n. (3 pieces), after vp (2 pieces), after sn. (3 pieces), after vp (3 pieces), then into the arch from vp (3 pieces) do s.n. (1 piece) after to the arch of VP (5 pieces) do s.n. (9 pieces), after to the arch from vp (3 pieces), do with. (1 piece), after vp (3 pieces), after to the arch from vp (2 pieces) do s.n. (3 pieces), then vp (2 pieces), after sn. (3 pieces)
6. Once again, we expand the work and do VP (3 pieces - a string), and into the arch from vp (2 pieces) we knit sn (3 pieces), after vp (2 pieces), then S.N. (3 pieces), after vp (4 pieces), after to the arch from vp (3 pieces), do with. (1 piece), then vp (4 pieces), after sec. (1 piece), v.p. (4 pieces), by the fan. Then on the central loops (3 pieces) according to s. (1 each), after vp (4 pieces), then into the arch from vp (3 pieces) do with. (1 piece), after vp (4 pieces), then c. (1 piece), after vp (4 pieces), after to the arch from vp (2 pieces) do s.n. (3 pieces), v.p. (2 pieces), after sn. (3 pieces)
7. Once again, we expand the work and do VP (3 pieces - string), into the arch from vp (2 pieces) do VP (3 pieces), after sn. (1 piece), then vp (2 pieces), after sn. (3 pieces), then vp (3 pieces), in the arch of vp (4 pieces), do with. (1 piece), after vp (5 pieces), after the arch of VP (4 pieces) skip and do in the next arch of vp (4 pieces) sec. (1 piece), after vp (3 pieces), after in the center we do a fan with. (1 piece), after vp (3 pieces), then to the arch from vp (4 pieces) do with. (1 piece), after doing VP (5 pieces), after we skip the arch from vp (4 pieces), and in the next arch from vp (4 pieces) do with. (1 piece), after doing VP (3 pieces), then into the arch from vp (2 pieces), do s.n. (3 pieces), after vp (2 pieces), and then S.N. (3 pieces).
8. Once again, we expand the work and do VP (3 pieces - string) in the arch from vp (2 pieces) do s.n. (3 pieces), and after vp (2 pieces), then S.N. (3 pieces), after vp (3 pieces), then into the arch from vp (3 pieces), do with. (1 piece), then into the arch from vp (5 pieces), do s.n. (9 pieces), after to the arch from vp (3 pieces) do with. (1 piece), and then into the arch from vp (5 pieces), do s.n. (9 pieces), after to the arch from vp (3 pieces) do with. (1 piece), and then VP (3 pieces), after to the arch from vp (2 pieces) do s.n. (3 pieces), after vp (2 pieces), then S.N. (3 pieces).
9. 9 row do as the 6th.
10. 10 row do as the 7th.
11. 11 row do as the 8th.

Unusual look of a shawl (Turkish knitting)

Such a product always knits from the bottom edge, gradually expanding upward. To make it convenient for you to knit this product you need to pick up good threads. These can be natural cotton threads, thin lurex threads or light knitting threads.

1. First, take the shawl in circular rows, following the instructions.
2. Then go to the air loops that you make long, so pull the thread when knitting such a loop longer than usual.
3. Then knit the berries into the product, in the loops of which you need to pull out the thread more authentically and make the berries themselves from seven columns with crochets, this will help to make such berries more convex and large.
4. On the sides of our future shawl, you need to make a series of columns with two crochets and rises of up to five loops.

Colorful shawl

To knit such a shawl you need to change the threads every two rows. If it’s hard for you to knit like that, then just use our instruction diagram and tie a plain version.

Knitting pattern:

To start, we knit six rows of flowers in two threads.

Then a strip of 1: 2 pink threads.

Then a strip of 2: 1 pink and 1 yellow threads.

Then a strip of 3: 2 yellow threads.

Then a 4: 1 strip of fuchsia and 1 yellow thread.

Then a strip of 5: 2 threads of fuchsia color.

Then a strip of 6: 1 threads of fuchsia color and 1 thread of red.

Then a strip of 7: 2 red thread.

How to knit:

First you need to knit 6 air loops in 2 threads, then form a circle using loops of a half-crochet without a crochet in the first row. After we continue to knit as indicated in the figure under the number M1. and pay attention to the color scheme. Instead of cutting the thread after the seventh strip, make along the edge of the future shawl - 4 air loops, 1 s / t. and s / n., followed by 1 air loop and 1 s / t. and s / n. after 1 air loop and 1 s / t and s / n. After we continue our knitting along the side (next). Finish 1 p: st and b: n, at the top of the corner of the shawl, then cut and fasten the thread.

On a note! When you change the color of the thread to another, do not forget to firmly fix the same. Otherwise, it is likely that the work will fall apart when worn.

The colors used in this shawl are fuchsia, pink, yellow and red. You can use any colors you want. The most important thing is that they match the color scheme to each other. Also the row frequency and color set can be changed. Most importantly, follow the knitting instructions, and what color of the thread to choose is up to you to choose.

How to make different patterns in knitting shawls

To make any patterns in your future shawl, just use our instructions diagrams, which indicate how to properly knit the loops.

Butterfly pattern

Long-legged fan pattern

Vertical pattern

Crossed columns pattern

Triangles pattern

Pattern corners

Flower pattern

Shawl Knitting Ideas

If you have minimal knowledge of crocheting, it will not be difficult for you to understand these patterns that come with small tips. Stock up on time, yarn and boldly get to work, because you will surely succeed, even if you knit a shawl for the first time.