Bouquet with beer and dried fish
You'll need:
- 2 pcs. beer in reinforced concrete.
- 4 things. long twigs.
- Wooden skewers.
- Scissors.
- Scotch.
- Packaging containers, as for packaging products.
- Twine.
- Any snacks.
- Dried ram.
- Greens for decoration.
- 2 pcs. red chili peppers.
- Wrapping paper.
Manufacturing process:
Use sticky tape to glue wooden sticks to beer cans.
After the stick, it is worth tying, as indicated in the photo using twine (thin rope)
Insert a wooden skewer into the fish.
Set it between two cans of beer, securing the skewer between the sticks.
Crackers, peanuts or chips should be transferred from the original packs to packaging polyethylene. Cut the polyethylene into 20 * 20 squares and twist them, as indicated in the photo.
We fill our snacks in plastic bags and fix the top with twine.
After each fist, it is worth piercing a little with a wooden skewer.
And fix in our bouquet with beer and fish.
You can also add a few more fish, for the abundance of our bouquet. String the fish on wooden skewers.
And add them to the bunch.
Then go to the red pepper.
String each pod on a wooden skewer and add to the bouquet between our fish and snacks.
We decorate the bouquet with the help of greenery, fixing it as indicated in the photo using a heat tape.
Add the feathers of green onions and decorate our bouquet.
Now proceed to wrapping the bouquet with wrapping paper, not forgetting to tighten the tail itself with twine.
Bouquet with beer and smoked sausage
You'll need:
- 1 bottle of beer in a glass container.
- 400 gr. hunting sausages.
- 5 pieces. red, hot pepper.
- 200 gr. smoked cheese.
- 200 gr. dried pink salmon (snacks)
- Kraft paper.
- Wooden skewers.
- Twine.
- Scotch.
- A bit of cardboard.
- Glue.
Manufacturing process:
First, we cut the sausages in half, divide the cheese into pieces, and then we string all our elements on wooden skewers.
On the bottom of the bottle with beer at the very bottom, glue a strip of cardboard.
And after around the bottle with adhesive tape, stick our snacks on skewers. To do this, lean the snacks as tight as possible to the bottle, and fix the legs of the wooden skewers with tape, wrapping them in the bottle and the legs of the skewers themselves.
We wrap our bouquet with craft paper and fix it with twine.
Beer bouquet with sausage and vegetables
You'll need:
- 1 stick of Moscow, dry sausage or salami.
- 200 gr. hunting sausages.
- 100 gr. raw sausages.
- 5 pieces. red, hot pepper.
- 100 gr. tomato (cherry)
- 3 pcs. triangular cream cheese.
- 1 PC. white sausages (salami)
- 5 pieces. round cheese (creamy)
- Wrapping.
- 1 PC. lemon.
- Wooden skewers.
- Scotch.
- 1 PC. baguette.
- Twine.
- 1 bottle of beer in a glass container.
- Napkins
Manufacturing process:
First, cut the sausage into three or four parts. After we cut the lemon in half and cut the baguette. In a napkin, preferably of dense quality, we wrap our beer bottle. We attach wooden skewers to the napkin itself using tape. After we string our sausage and sausages on skewers.
After we turn to the cherry tomatoes.
We do the same with chili peppers, piercing each along and only one across. We string cheese on a skewer.
After wrapping the wrapped bottle with beer, another napkin to hide the skewers on which the sausage is strung.
Then, using a wide adhesive tape, we fasten the free ends of the wooden skewers to a napkin at the base of the bottle.
We hide our little steps with a new napkin.
We put half of the baguette to the bottom of the bottle and, using brown paper and twine, fasten them together. We get something like a pen.
Beer bouquet with crayfish
You'll need:
- 1 PC. lemon.
- 1.5 kg living crayfish.
- 1 bottle of beer in a glass container.
- Wooden skewers.
- Cardboard tube (paper towel sleeve)
- Penoplex.
- Crafting paper.
- Rubber bands for money.
- Ribbon.
Manufacturing process:
Boil water and boil all the crayfish in it, adding spices and salt to the water.
After the crayfish are cooked, put them on a towel and let them cool.
Using a wooden skewer we pierce each carcass of cancer in the tail area. Glue 4 pieces of wooden skewers with adhesive tape at the base of the bottle, as indicated in the photo. Cut the lemon into quarters and string on wooden skewers.
To make a strong base, we need a foam and a cardboard tube. We do the necessary manipulations as indicated in the photo, and wrap the cardboard handle with wrapping paper.
We stick a bottle of beer with a neck in penoleks and the free ends of wooden skewers.
From kraft paper (wrapping) we cut out a small square and make small cuts on it, as in the photo.
We bend the side parts, put our bouquet and fasten the base with tape. We cover the main part of the bottle and penoplex with kraft paper, as in the photo and fix it with tape.
Edible bouquet without alcohol
You'll need:
- 40 pcs. hunting sausages.
- 200 gr. cheese.
- 1 PC. sweet pepper.
- 5 pieces. chili peppers.
- 150 gr. cherry tomato.
- 1 PC. baguette.
- 1 pack of bread sticks.
- Wooden skewers.
- 100 gr. black olives (seedless)
- Wide tape.
- Wrapping paper.
Manufacturing process:
A very simple bouquet, the formation of which will not take you much time. First, rinse all the vegetables well, and cut the cheese into large pieces. After using wooden skewers, string on them vegetables, cheese, sausages and baguette.
Fold your bouquet in any vase to make it more convenient to form a bouquet. Decorate it by inserting bread sticks and greens between skewers. After we tie the free legs of wooden skewers with tape and pack the bouquet in wrapping paper. We dress the bouquet at the base with a beautiful ribbon and the bouquet is ready.
Purely alcoholic bouquet
You'll need:
- 11 bottles with various alcoholic drinks (100-150 ml.)
- Wooden skewers.
- Glue gun.
- Scotch.
- Sisal fiber.
- Wrapping paper.
- Glass jar (1 liter)
- Styrofoam.
- Decorative elements.
Manufacturing process:
Each bottle of alcohol should be fixed on a wooden skewer with a glue gun. For reliability, you can wrap both the bottle and the skewer itself with thin tape.
Then take the can and put something heavy in it to make the can heavier, and put a piece of foam on top. Sisal is poured into the inside of the can, and then the free ends of the skewers with alcohol, pre-lubricated with glue, are stuck into the foam. By the way, the jar itself on the front side can be pasted over with burlap or colored paper.
You can also put candies inside the jar.
Walnut bouquet with beer
- 3 cans of beer in a can.
- 3 pcs. dried roach.
- 200 gr. pistachios.
- 100 gr. other salted nuts.
- Wooden skewers.
- Net for flowers.
- Silk ribbon.
- Glue or glue gun for greater convenience.
- Film for food packaging.
- Wide tape.
- Corrugated cardboard or other thick cardboard.
- 3 pcs. artificial green stalk.
Manufacturing process:
From the corrugated cardboard we make the basis for our bouquet. After we glue the base with a net and a silk ribbon, we also fix artificial green twigs in the area of the upper part of the bouquet.
To attach the cans to the base firmly, it is worth wrapping each of them on the bottom with paper. After that, glue the same paper to the base of the bouquet with glue. We arrange beer cans in our bouquet, as indicated in the photo, and between them we spread our fish, previously wrapped with cling film. The film itself is a little worth gluing with glue, and stick it to the base of the bouquet.
Pistachios and peanuts pour into cling film, do something like round circles and put on round pieces cut from yellow paper. Cut and tear the edges of the paper like flower petals. Glue the bag of nuts themselves to the base of the flower, and the flower itself to the base of the bouquet or a can of beer.
After we wrap our bouquet in wrapping paper and fix the base with silk ribbon.
And a beautiful, nutty bouquet is ready!
