Hardware pedicure is the most beautiful and neat kind of pedicure. After such a pedicure, you simply will not recognize your legs, especially if you have cracks and rough skin. You just do not see all this after a hardware pedicure.

Two processing methods

1 Dry. With this method, the master works only with the apparatus on a dry foot.

2 Wet. First, the master applies a softening composition to the foot, giving him time to act. Then it cleans everything that has softened with the apparatus and then polishes it.

Both methods are effective and their technique is the same. Performing a pedicure is carried out in several stages.

The first step is foot processing

This is the most important and most painstaking process. Work begins with foot disinfection. Next, we begin by removing very rough skin (hyperkeratosis). It is carried out roughly by an abrasive mill. Heel processing goes from the outside to the center with emphasis on the thumb. So the right side is processed. We also process the left side, but focusing on the little finger, holding the handle of the device like a fountain pen. All movements in the hardware pedicure are quick without stopping in one place, so as not to injure, burn the foot. And so we are working on the whole foot.

Next, change the cutter, choose a medium abrasive. Work in the same way as with the previous cutter, only with less pressure. At the end of the work, this cutter removed all cracked and rough skin. Then move on to polishing. This process is carried out with a soft abrasive cutter. This is the most painless and enjoyable part for the client. At this stage, the processing of the foot is completed and we move on to the nails.

The second stage - nail treatment

To begin with, we remove the length of the nails, we do this all with the apparatus. Next, we begin to raise the cuticle, clearing the entire pterygium, extra soft truncated cone, but this is only for the thumb. For small, you need a corundum thin nozzle. With the same cutter, we remove all the irregularities of the nail and grind the surface. Next, with a sharp-pointed nozzle, you need to work out the deep side sinuses. With such a long be careful, the cutter is quite easy to injure. The raised cuticle is removed with a ball or drum with a blue abrasive. This is the end of the processing.

The third stage - massage

In salons, massage is most often included in the pedicure process. This is such a nice process after all these treatments. Massage is done with oil or cream matched to your skin type.

The fourth stage - color coating

Admit, all the girls like not only well-groomed feet and nails, but also when the nails are covered with some color. It can be a gentle plain or classic jacket. Or maybe you like bright and catchy colors. Everything is your choice.